| Company
Name: Anping jinlu wrei mesh machine factory
|
Expanded Metal Machine
Expanded Metal Machine
The machlnes are used for punching shear the cold crimped engine bed with the thickness of 0.4- 6mm the width of 2000mm Material strength of 450N/mm2The specifications of punching shear are su~eyed by the bit of TB5-20 mesh grid plate:if the TB TL are changed the punching shear knife is also changed;TB,TL are increased,the punching shear strength is reduced:TB,TL are reduced,the punching shear strength is increased In order not to damage components for the excess load.
The nominal tonnage is 63T lf TB TL are reduced the punching shear strength surpasses the nominal tonnage,you can reduce the material thickness and width.
The machines are used for punching all kinds of expand plate mesh in construction.common hardware,window and door,machine protecting etc.
6.3T 16T
25T 63T
125T Flattening machine
Expanded Metal Machine
Type
6.3T
16T
25T
63T
125T
Punching
sheet thickness ≤1.0mm
≤1.3mm
≤1.5mm
≤3mm
≤6mm
Punching sheet width ≤600mm
≤1000mm
≤1250mm
≤2000mm
≤2000mm
Times of Sliding 250r/min
150r/min
150r/min
70r/min
45r/min
Material distance 0.1-0.3mm
0-10mm
0-12mm
0-3mm
3.5-7.0mm
Sliding distance 30mm
30mm
40mm
60mm
80mm
Cut the stencil
plate continuously
per hour 1.6-13m
2.7-5.4m
3-6m
2.1-12.6m
4.2-8.4m
Power 2.2kw
3kw
4kw
11kw
22kw
Outside
Dimension(mm) 1090x710x1450
1740x1400x1870
1740x1400x1870
3560x3300x2280
5940x3270x1925
Complete
machine weight 1.2T
2.4T
3T
11T
12.5T
Opening mesh ≤25mm
≤50mm
≤150mm
≤200mm
≤200mm
|
|
|
|
